How to Find and Fix Water Leaks

To find water leaks, start with your water meter: turn off all water in the house and see whether the meter still moves. Then check each toilet with a few drops of food coloring and look closely at faucets, showerheads, hose bibs and under sinks. Many leaks, like a worn toilet flapper or a dripping faucet, are simple fixes; leaks in walls, floors or the main line are a job for a licensed plumber.
Leaks are the quietest waste in a home, which is why they come early in our Saving Water section. They run day and night whether anyone is home or not.
Step 1: The meter test
This test tells you whether you have a leak anywhere in the system.
- Turn off everything that uses water, including the dishwasher, washing machine, ice maker, sprinklers and any running taps. Ask your household not to flush for a while.
- Find your meter. It's usually in a covered box near the street, in a basement or where the main line enters the house.
- Look for a leak indicator. Many meters have a small triangle, star or dial that spins when even a little water flows.
- Write down the reading and note whether the indicator is moving.
- Wait an hour or two without using any water, then check again.
If the reading changed or the indicator moved, water is leaving the pipes somewhere. The next steps help you narrow it down. If you share a meter in an apartment building, tell your landlord or building manager instead, since other units may be using water.
Step 2: The toilet dye test
Toilets are one of the most common sources of hidden leaks, because a worn flapper can let water slip silently into the bowl.
- Take the lid off the tank.
- Add a few drops of food coloring or a dye tablet to the tank water.
- Don't flush. Wait about 15 minutes.
- Look in the bowl. If you see color, the tank is leaking into the bowl.
- Flush afterward so the dye doesn't stain.
Repeat for every toilet in the house.
Step 3: Check faucets, showers and outdoor taps
Walk through the house with a flashlight and a dry paper towel.
- Faucets: watch for drips from the spout after you turn it off, and check under the sink for moisture around the supply lines and drain.
- Showers and tubs: look for drips from the showerhead or tub spout, and check the caulk around the tub.
- Outdoor hose bibs: check for drips and puddles, and look at the hose connection.
- Appliances: check behind the washing machine and dishwasher for damp floors or worn hoses.
- Water heater: look for puddles or rust around the base.
Common fixes you can usually do yourself
| Problem | Likely cause | Typical fix |
|---|---|---|
| Toilet runs or refills on its own | Worn flapper | Shut off the toilet's supply valve, drain the tank and swap the flapper for one that fits your model |
| Toilet keeps running after a flush | Fill valve set too high or chain tangled | Adjust the float or chain per the instructions for your toilet |
| Faucet drips | Worn washer, O-ring or cartridge | Shut off the valves under the sink and replace the part; take the old one to the store to match it |
| Showerhead drips at the joint | Old plumber's tape | Unscrew, rewrap the threads and reinstall |
| Hose bib drips | Worn washer in the hose connection | Replace the hose washer |
Before any repair, shut off the water to that fixture at its own valve or at the main shutoff. Take a photo before you take things apart so you remember how they go back together.
When to call a licensed plumber
Some leaks aren't DIY jobs. Call a licensed plumber when:
- You see water stains on ceilings or walls, or soft spots in floors.
- The meter shows a leak but you can't find it.
- The leak is near electrical outlets, wiring or a panel.
- The water heater is leaking.
- The leak is at the main line, the meter or underground in the yard.
- You can't shut the water off to the leaking area.
If water is spreading, shut off the main water valve first. Find yours today, before you need it, so you're not searching in a hurry. Renters should report leaks to the landlord quickly; most leases expect you to.
Leaks and energy
A dripping hot water tap wastes energy as well as water, since your water heater keeps reheating what drips away. If you're already walking through the house looking for drips, it's a good moment to look for drafts too. Our home energy audit guide uses a similar room-by-room approach for heating, cooling and lighting.
After the leaks are fixed
Once the pipes are tight, everyday habits make the biggest difference.
- In the bathroom, our shower and toilet savings guide covers shorter showers, tank checks and aerators.
- In the kitchen and laundry room, laundry and dishes covers full loads and efficient settings.
- If a fixture is old or worn out, low-flow fixtures explains what to look for when you replace it.
Worked example
Example: Sam noticed their water bill crept up over a few months even though nothing had changed at home. They did the meter test on a Sunday morning and saw the leak indicator turning slowly. The dye test showed nothing, so they checked outside and found a hose bib dripping behind a shrub. A new hose washer fixed it. When they repeated the meter test, the indicator stayed still.
Seasonal leak checks
Leaks don't only show up when something breaks. A short check each season keeps small problems small.
| Season | What to look at |
|---|---|
| Spring | Outdoor taps and hoses after winter, sprinkler heads, toilet flappers |
| Summer | Irrigation lines, soaker hoses, the area around the water heater |
| Fall | Disconnect and drain hoses before freezing weather; look under sinks |
| Winter | Exposed pipes in crawl spaces, garages and outside walls that could freeze |
Something to do today
Do the toilet dye test on every toilet in your home. It takes about 15 minutes, costs only a few drops of food coloring, and a leaking flapper is one of the easiest plumbing parts to replace yourself.
Want a step-by-step plan or guide?
Some people like the structure of a paid guide or set of plans. This button opens a third-party program from one of our advertising partners. Its claims are its own, not ours, so weigh them against our checklist for judging paid plans.
See the partner program →We may be paid when you click. The program shown can change. Read its terms before you buy anything. How this works
Frequently asked questions
How can I tell if I have a hidden water leak?
Turn off every tap and water-using appliance, then watch your water meter for an hour or two. If the reading changes or the leak indicator spins, water is going somewhere, and a leak is likely.
How do I know if my toilet is leaking?
Put a few drops of food coloring in the toilet tank, don't flush, and wait about 15 minutes. If color shows up in the bowl, water is leaking past the flapper and it likely needs replacing.
When should I call a plumber about a leak?
Call a licensed plumber for leaks inside walls, ceilings or floors, any leak near electrical wiring, a leaking water heater, a leak at the main line or anything you can't safely shut off. Shut off the water first if you can.



