How to Save Water on Laundry and Dishes

To save water doing laundry and dishes, run full loads, choose the shortest cycle that gets things clean, scrape dishes instead of rinsing them, and wash by hand in a filled basin rather than under a running tap. Wearing clothes more than once when they're still clean also helps. Together, these switches cut water and, when hot water is involved, the energy it takes to heat it.
The kitchen and laundry room come right after the bathroom in our Saving Water section, because they're the next biggest daily uses for many homes.
Laundry: fewer, fuller loads
The simplest laundry switch is to do fewer loads by filling the machine.
- Wait for a full load, or set the machine's load-size option to match. A half load on a full setting wastes water.
- Wear it again. Jeans, sweaters, hoodies and pajamas can often go a few wears between washes.
- Choose a normal or eco cycle for everyday clothes. Heavy-duty cycles often use more water and run longer.
- Skip the extra rinse unless you need it for heavy soil or sensitive skin.
- Use the amount of detergent the label suggests. Too much soap can leave residue that some people try to fix with extra rinses.
- Wash in cold for most loads. It doesn't reduce water, but it reduces the energy spent heating it.
Our green laundry guide goes further on detergents, line drying and caring for clothes so they last.
Front-loader or top-loader?
When it's time to replace a washer, look at the yellow EnergyGuide label for estimated energy use and check whether the model is ENERGY STAR certified. Our ENERGY STAR guide explains both. Front-loading and high-efficiency top-loading machines are generally designed to use less water than older traditional top-loaders. Compare specific models, since they vary.
Dishes: the dishwasher question
People often ask whether the dishwasher or the sink uses less water. The honest answer is that it depends, but in general:
| Situation | Usually the lower-water choice |
|---|---|
| Efficient dishwasher, run full | Dishwasher |
| Older dishwasher, often run half-empty | Hand washing in a basin may be closer |
| Hand washing under a running tap | Almost always uses more than a full dishwasher |
| A few dishes only | A quick basin wash, or wait until the dishwasher fills |
Dishwasher tips
- Run it only when full, but load it so water can reach every dish.
- Scrape, don't rinse. Scrape food into the trash or compost. Check your manual; many modern machines are built to handle residue.
- Pick the normal or eco cycle. Heavier cycles often use more water and energy.
- Air dry by opening the door after the cycle ends, if your machine allows it.
- Clean the filter. Many dishwashers have a filter at the bottom that needs a rinse now and then, per the manual.
Hand-washing tips
- Use two basins or a basin and a dish rack. Fill one with soapy water to wash and the other with clean water to rinse.
- Soak pots instead of scrubbing them under the tap.
- Wash the cleanest things first and the greasiest last, so the wash water lasts longer.
- Turn the tap off between rinses if you only have one sink.
Reusing water from the kitchen
Water you'd otherwise pour down the drain can sometimes do one more job:
- Water from rinsing produce in a bowl can go to houseplants or the garden.
- Cooled pasta or vegetable water can water plants, as long as it isn't salty or greasy.
- Avoid reusing soapy dishwater on edible plants; detergents and food grease aren't good for soil or crops.
If you're interested in reusing laundry water on a bigger scale, that's greywater, and rules vary a lot by state and city. Our rain barrels and greywater guide explains the basics and why plumbing changes belong to a licensed plumber.
Kitchen water you drink
The kitchen tap is also where most people get drinking water. If you're thinking about a pitcher, faucet or under-sink filter, our water filter guide explains certification, cartridge changes and how to read your utility's water quality report so you pick a filter that matches what's actually in your water.
Worked example
Example: Lee lives alone and was running a half-empty dishwasher every night out of habit. They switched to running it every other day, stopped pre-rinsing and started scraping plates into the compost bin. For laundry, they began waiting until the basket was full and set the machine to cold for everything except towels and bedding. Both changes fit into their existing routine without extra effort.
Pair it with the bathroom
If you've already worked on the kitchen and laundry room, the bathroom is the other daily water hot spot. Our shower and toilet savings guide covers shorter showers, toilet checks and sink habits.
Quick reference: settings that matter
Most machines offer more options than people use. Here's what to look for on the dial or panel:
| Setting | What it does | When to use it |
|---|---|---|
| Load size or auto-sensing | Matches water to the amount of laundry | Every load, if your washer has it |
| Eco or normal cycle | Balances cleaning with water and energy use | Everyday clothes and dishes |
| Quick wash | Shorter cycle | Lightly worn clothes; check that it fits full loads |
| Extra rinse | Adds another rinse | Only when needed for soil or sensitive skin |
| Heated dry (dishwasher) | Uses heat to dry dishes | Skip it if your machine lets you air dry |
| Rinse and hold | Rinses dishes while you wait to fill the machine | Use sparingly; scraping is often enough |
Every model is different, so keep the manual handy or look it up online by model number. A few minutes reading it can show you settings you didn't know you had.
Small habits around the sink
- Keep a scraper or spatula by the sink so scraping plates becomes automatic.
- Use one drinking glass or bottle a day per person, so there are fewer dishes to wash.
- Soak sticky pans right after cooking, while residue is still soft.
Something to do this weekend
Find your dishwasher's filter, usually at the bottom under the lower rack, and clean it according to the manual. Then check your washer for a load-size or eco setting you may not have used. A clean filter and the right setting help each load do its job the first time, so you're less likely to rewash.
Want a step-by-step plan or guide?
Some people like the structure of a paid guide or set of plans. This button opens a third-party program from one of our advertising partners. Its claims are its own, not ours, so weigh them against our checklist for judging paid plans.
See the partner program →We may be paid when you click. The program shown can change. Read its terms before you buy anything. How this works
Frequently asked questions
Is it better to use the dishwasher or wash by hand?
It depends on your dishwasher and how you wash by hand. A modern, efficient dishwasher run full often uses less water than washing the same load under a running tap. If you hand wash, use a filled basin instead of running water.
Do I need to rinse dishes before putting them in the dishwasher?
Many modern dishwashers are designed to handle food residue, so scraping is often enough. Check your dishwasher's manual, since some older models do better with a quick rinse.
Does washing clothes in cold water save water?
Cold washing doesn't change how much water a load uses, but it reduces the energy spent heating that water. Full loads and the right load-size setting are what reduce the water itself.



