How to Find and Seal Air Leaks

To seal air leaks, first find them by feeling for drafts and looking for daylight around doors, windows, outlets and pipes. Then match the fix to the gap: weatherstripping for parts that move, like doors and window sashes; caulk for cracks between parts that don't move; door sweeps for the gap under a door; and foam gaskets behind outlet covers on exterior walls. Most of these are beginner-friendly weekend jobs that cost little.
Sealing drafts is one of the most hands-on projects in our Home Energy section, and it often makes a room feel more comfortable right away.
Why small gaps matter
Each crack around a door or window may look tiny, but a home has many of them. Together they let heated or cooled air escape and outdoor air slip in, making rooms drafty and your system work harder. Sealing the gaps you can reach is a low-cost way to improve comfort.
Step 1: Find the drafts
Pick a cold or windy day, when leaks are easiest to feel.
- Close all exterior doors and windows. Turn off fans.
- Use your hand. Dampen the back of your hand and move it slowly around window frames, door edges, baseboards, and outlets and switches on exterior walls.
- Use a tissue. Hold a thin strip of tissue or a light ribbon near suspected gaps; if it flutters, air is moving.
- Look for daylight. Check around closed exterior doors, especially at the bottom and corners.
- Try the paper test on doors and windows. Close a door or window on a sheet of paper. If it slides out easily, the seal may be worn.
- Check where things go through walls. Pipes under sinks, dryer vents, cable lines and outdoor faucets.
Keep a list with the location and size of each leak. For a more thorough check, a professional energy audit uses a blower door test to measure leaks across the whole home; our guide to a home energy audit explains it.
Step 2: Pick the right fix
| Leak location | Common fix | Notes |
|---|---|---|
| Sides and top of a door | Weatherstripping (foam tape, V-strip, or rubber tubular) | Measure the gap and match the product |
| Bottom of a door | Door sweep or draft stopper | Sweeps attach to the door; stoppers just lie on the floor |
| Window sashes | V-strip or foam tape where the sash meets the frame | Make sure windows still open and lock |
| Gaps around window or door trim | Caulk | Indoors, use a paintable caulk suited to the surface |
| Outlets and switches on exterior walls | Foam outlet gaskets | Turn off power first (see below) |
| Large gaps around pipes | Expanding foam made for gaps | Follow the label; some foams expand a lot |
| Drafty windows you can't fix now | Plastic window film kit | A removable option for winter |
Step 3: Install weatherstripping
- Clean the surface where the strip will go and let it dry.
- Measure twice and cut the strip to length.
- Install it so the door or window compresses it when closed, without straining the latch.
- Test it. The door should close and latch easily. If it's hard to close, the strip may be too thick.
Adhesive strips work best in mild temperatures, so check the package for the right range.
Step 4: Caulk the gaps
- Scrape out old, cracked caulk and wipe the area clean.
- Cut the tube tip at an angle to a small opening; you can always make it bigger.
- Apply a steady bead along the gap, holding the gun at an angle.
- Smooth it with a damp finger or a caulk tool.
- Let it cure per the label before painting.
Use caulk rated for the location, such as exterior-grade outside or kitchen and bath caulk in damp areas. Ventilate the room, follow the label, and keep products away from kids and pets.
Step 5: Add outlet and switch gaskets safely
Outlets and switches on exterior walls can leak air. Pre-cut foam gaskets fit behind the cover plate.
- Turn off the circuit at the breaker panel.
- Remove only the cover plate screws and plate. Don't touch the wires or the outlet itself.
- Place the gasket over the outlet or switch.
- Replace the cover plate.
- Turn the power back on.
If you see scorch marks, loose or damaged wires, or anything that looks wrong, stop and call a licensed electrician.
When to call a professional
Some leaks aren't DIY projects:
- Gaps around chimneys, furnace flues and water heater vents, which need fire-safe materials and proper clearances.
- Attic air sealing around recessed lights and wiring.
- Rotting window frames, failing exterior doors or damaged siding.
- Anything involving wiring.
If your home has gas, oil or wood-burning appliances, sealing it tighter can affect how they vent. Have a licensed HVAC professional check, and make sure your carbon monoxide alarms work; our indoor air quality guide covers CO alarms.
Renter-friendly options
If you rent, you can still make a difference without permanent changes: removable draft stoppers under doors, plastic window film kits, removable caulk, peel-and-stick foam weatherstripping, and heavy curtains. Our guide to green living for renters has more ideas and tips for asking a landlord about bigger repairs.
Where sealing fits
Air sealing and insulation work together. Once the drafts in your living space are handled, our guide to insulation basics explains how to tell if your attic and walls need more. A well-sealed home also matters if you're planning a heating and cooling upgrade, since contractors size systems based on how much heat the home loses; see heat pumps explained. And if a drafty old appliance door seal, like a fridge gasket, turns up on your list, our guide to ENERGY STAR appliances helps you decide whether to repair or replace.
Example: one drafty door
Example: Jamie felt a cold breeze along the back door of their townhouse, and daylight showed at the bottom corner. They bought rubber tubular weatherstripping and an adjustable door sweep. After installing both, the paper test showed a firm seal all around, and the door still latched easily. The whole project took about an hour.
Something to do this weekend
Do the draft hunt in Step 1 and list every leak you find. Pick the door or window that bothers you most and seal it with weatherstripping or a sweep. Save the rest of the list for next weekend.
Want a step-by-step plan or guide?
Some people like the structure of a paid guide or set of plans. This button opens a third-party program from one of our advertising partners. Its claims are its own, not ours, so weigh them against our checklist for judging paid plans.
See the partner program →We may be paid when you click. The program shown can change. Read its terms before you buy anything. How this works
Frequently asked questions
How do I find air leaks in my house?
On a cold or windy day, move a damp hand or a thin strip of tissue slowly around window and door frames, outlets on outside walls and places where pipes enter. A cool breeze or a fluttering tissue points to a leak. Daylight around a closed door is another sign.
What is the difference between caulk and weatherstripping?
Caulk seals gaps between parts that don't move, like window trim and walls. Weatherstripping seals gaps around parts that open and close, like doors and window sashes.
Can renters seal drafts?
Often, yes, with removable options like draft stoppers, removable caulk, plastic window film kits and peel-and-stick foam. Ask your landlord before making permanent changes, and report big leaks so they can be fixed properly.



