How to Judge DIY Solar and Energy Plans

To judge a DIY solar or energy plan, check five things before you buy: the skill level it assumes, whether it includes real safety and code guidance, how complete its parts list is, whether you can see sample pages, and how its refund policy works. A good plan sticks to projects a beginner can do safely and tells you plainly which jobs belong to a licensed professional.
This is part of our Choosing Plans & Programs section, which helps you evaluate any paid program. DIY plans deserve extra care, because a bad one can cost more than money if it leads you into unsafe electrical work.
The safety line comes first
Before looking at anything else, know where DIY ends:
| Usually reasonable DIY | Leave to licensed pros with permits |
|---|---|
| Solar garden and path lights | Rooftop solar installation |
| A portable panel charging a portable power station | Home battery systems tied into your electrical panel |
| Plug-in devices like smart power strips | Electrical panel upgrades and new circuits |
| Weatherstripping, caulking and outlet gaskets | EV charger installation |
| Small solar kits for a shed light, used as directed and not wired into the home | Any work on gas lines or gas appliances |
| Window insulation film and draft stoppers | Roofing work and roof penetrations |
If a plan walks you through anything in the right-hand column as a DIY job, that's a strong reason to pass, however polished the plan looks. Wiring mistakes can cause fires and shocks, and work done without permits can create problems with insurance, inspections and selling your home.
Five things to check
1. Skill level
A good plan says who it's for. Look for a clear statement like "beginner, basic hand tools" or "intermediate, comfortable with a drill and measuring." If the plan doesn't say, look at the instructions themselves. Do they assume you know terms like watt-hours, amp-hours or wire gauge without explaining them? That's a sign it may not be beginner-friendly.
2. Safety and code notes
Real plans include warnings: disconnect power, use the right fuse or breaker size, wear eye protection, keep batteries ventilated and away from heat, follow the equipment's manuals. They also tell you to check local building codes, permits and HOA or lease rules. A plan with no safety section at all, or one that calls permits "red tape you can skip," is not one to trust.
3. Parts list
A full parts list tells you what the project really involves and roughly what you'll need to buy. Check for:
- Every component listed by type and spec, not just "a battery" or "some wire"
- Tools you'll need
- Notes on which parts must match each other, like a panel and a charge controller
- No pressure to buy parts only from one seller
If the list is vague, you can't plan or budget. If it pushes one supplier hard, ask why.
4. Sample pages
Before buying, look for a sample chapter, a detailed table of contents or preview images of the actual plans. Clear diagrams and step-by-step instructions are a good sign. If all you can see is a sales video and testimonials, you're buying blind.
5. Refund policy
Read the refund policy before you pay. Look for:
- How many days you have to request a refund
- What conditions apply
- How to request it, with a real contact method
- Who handles the payment, so you know where to turn if there's a problem
If you can't find the policy, or it's buried in fine print you can't access before checkout, treat that as a warning sign.
Claims to be skeptical of
DIY energy plans often come with big promises. Be wary of:
- Specific savings amounts or "no more electric bills"
- Devices claimed to produce more power than they use
- Claims that one small project makes your home energy independent
- Phrases suggesting utilities or the government are hiding something
- Testimonials with dramatic results and no way to verify them
Our red flags checklist explains these tactics in detail, including the FTC's rule on fake reviews.
Worked example: comparing two plans
Example: someone wants to light a backyard shed with solar. They compare two paid plans.
Plan A says it's for beginners, includes a sample page with a clear diagram, lists every part by type and size, explains how to size a small battery for a few lights, warns to keep the system separate from the home's wiring, and has a 30-day refund window explained on the sales page.
Plan B has a long video promising to "power your whole house," shows no sample pages, gives a parts list only after purchase and mentions refunds only in an email address at the bottom.
Plan A isn't automatically worth buying, but it passes the checks. Plan B fails most of them. Before buying either, the person reads our small solar projects guide and finds that a ready-made solar shed light kit might do the job without any plans at all.
Renters and HOA members: check permission too
Even a safe plug-in project can run into rules. Renters should check the lease and ask the landlord in writing before mounting panels, drilling holes or running anything across a balcony. Homeowners in an HOA should read the rules on visible equipment. A good plan mentions this. If yours doesn't, add it to your own checklist before you buy a single part.
Check free resources first
Many small energy projects are covered for free. Your utility, the Department of Energy, ENERGY STAR and Cooperative Extension offices all offer guidance, and your library may have books on solar and home efficiency. Our free resources guide lists where to start. If you're still not sure whether a paid guide makes sense at all, our guide to whether green guides are worth it walks through the decision.
If you buy a plan
- Read it fully before buying any parts.
- Compare its instructions with the manuals for the equipment you'll actually use. If they conflict, follow the manuals.
- Stop if you hit a step you're not sure about, and ask the seller or a licensed professional.
- Keep your receipt and note the refund deadline.
Something to do today
Pick one DIY energy plan or kit you've been curious about. Go through the five checks and write yes or no next to each: skill level, safety and code notes, parts list, sample pages and refund policy. If it gets fewer than four yeses, keep looking.
Want a step-by-step plan or guide?
Some people like the structure of a paid guide or set of plans. This button opens a third-party program from one of our advertising partners. Its claims are its own, not ours, so weigh them against our checklist for judging paid plans.
See the partner program →We may be paid when you click. The program shown can change. Read its terms before you buy anything. How this works
Frequently asked questions
Can I install solar panels myself with a DIY plan?
Small plug-in projects, like solar lights or a portable panel charging a power station, are reasonable DIY. Rooftop solar, home batteries, panel upgrades and anything wired into your home's electrical system belong to licensed professionals with permits.
What should a good DIY energy plan include?
A clear skill level, a full parts list, step-by-step instructions with diagrams, safety warnings, notes on when to hire a licensed pro and check local codes, and a support contact. A sample page helps you judge the quality before buying.
What if a DIY plan doesn't match my home?
Stop and don't improvise on anything electrical, structural or gas-related. Contact the seller with questions, check the refund policy, and talk to a licensed professional about your specific situation.



